CDFQN - 14105 TYME I
- MSDS: CDFQN
- Manufacturer: CRC INDUSTRIES INC
- Product Name: 14105 TYME I
- National Stock Number: 6850-00F052890
Product Identification
Product ID:14105 TYME I
MSDS Date:10/19/1992
FSC:6850
NIIN:00F052890
MSDS Number: CDFQN
Responsible Party
WARMINSTER, PA 18974
US
Emergency Phone: 215-674-4300
Info Phone: 215-674-4300
Preparer: JON BROWN
Cage: CRCIN
Contractor
Telephone: 215-674-4300/800-424-9300
Cage: 10136
Ingredients
OLEIC ACID POTASSIUM SALT, OLEIC ACID, POTASSIUM SALT
CAS: 143-18-0
RTECS: RK1150000
Fraction By Weight: 4.2%
PHENOL, HYDROXYBENZENE (IARC GROUP 3 ) *96-4*
CAS: 108-95-2
RTECS: SJ3325000
Fraction By Weight: 8.7%
OSHA PEL 5 PPM
ACGIH TLV: 5 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
XYLENE, DIMETHYLBENZENE, XYLOL (IARC - GROUP 3) *96-4*
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 8.8%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM, SKIN
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
DICHLOROMETHANE (METHYLENE CHLORIDE) (SUSP HUMAN CARC BY
CAS: 75-09-2
RTECS: PA8050000
Fraction By Weight: 49%
OSHA PEL 500 PPM
ACGIH TLV: 50 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 29.3%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: ANESTHETIC EFFECTS CAN BE
IRRITATING TO THE NOSE, THROAT & LUNGS. SKIN: CAN CAUSE BURNS,
ABSORPTION, DERMATITIS & LIVER DAMAGE. EYES: BURNS.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:DIZZINESS, NAUSEA, IRRITATION, BURNS.
Medical Cond Aggravated by Exposure:BREATHING PROBLEMS.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. GIVE CPR IF NECESSARY.
EYES/SKIN: FLOOD W/WATER FOR 15 MINS. INGESTION: DON'T INDUCE
VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:NONE
Extinguishing Media:CO2, FOAM.
Unusual Fire/Explosion Hazard:HIGH CONCENTRATIONS OF VAPOR MAY BE
IGNITED BY A HIGH ENERGY SOURCE.
Accidental Release
Spill Release Procedures:EVACUATE & VENTILATE AREA. WEAR PROTECTIVE
CLOTHING & BREATHING APPARATUS. PUMP/USE ABSORBENT. PUT MATERIALS
IN SEALED CONTAINER.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY AREA.
Other Precautions:MATERIAL IS DESIGNED TO SEPARATE INTO 2 LAYERS. THE
BOTTOM LAYER IS THE ACTIVE CLEANER & THE UPPER LAYER IS AN AQUEOUS
SEALING LAYER TO RETARD VENTILATION. MATERIAL SHOULDN'T BE STIRRED
DURING USE.
Exposure Controls
Respiratory Protection:USE SCBA IF ABOVE TLV.
Ventilation:REQUIRED TO MAINTAIN VAPOR CONCENTRATION BELOW TLV.
Protective Gloves:SOLVENT RESISTANT
Eye Protection:SAFETY GLASSES
Other Protective Equipment:RUBBER APRON & BOOTS.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:104F
Melt/Freeze Pt:M.P/F.P Text:30F
Vapor Pres:380
Vapor Density:>1
Spec Gravity:1.137
pH:11
Evaporation Rate & Reference:SLOWER THAN WATER
Appearance and Odor:YELLOWISH OPAQUE EMULSION W/A DARK BROWN LAYER &
UPPER YELLOW LAYER; ODORLESS
Percent Volatiles by Volume:87
Stability
Stability Indicator/Materials to Avoid:YES
ACTIVE METALS, POTASSIUM, SODIUM, CALCIUM.
Hazardous Decomposition Products:THERMAL: HYDROGEN CHLORIDE, CHLORINE,
SOME PHOSGENE.
Disposal
Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.